Eastey EA Professional Series, Руководство пользователя

Страница: 36 / 70

36 Operation
3. Open up the access doors in the front and rear columns at the infeed end of the
sealer module and in the front column at the exit end of the sealer module (see
the following illustration) to expose the chain keepers.
4. Temporarily remove the chain keepers: use a ¼ inch hex wrench to loosen the
bolts securing the chain keepers. There are six (6) bolts on each side of each of
the chain keepers.
5. On the control panel side of the machine, below the access door, slowly turn the
seal head adjustment knob in or out to raise or lower the seal system to the
required height.
The seal head should clear the top of the box by approximately 1 inch. For
example, for a box that is five inches (5”) tall, the seal head should open to about
6 inches above the belt surface.
Infeed Conveyor
Machine
Direction
Transverse
Direction
Access
Door (on
back)
Access
Door
Seal
Area
Access
Door
Sealing
Area
Access
Door
Access
Door
Chain Keeper
(with six bolts)
Chain Keeper
(with six bolts)