Eastey EA Professional Series, Руководство пользователя

Страница: 22 / 70

22 Operation
1. Optional Main Power Disconnect — For systems with optional 480V power
requirements only, a main power disconnect is located on the main electrical box
where power enters the system. This switch is a lever with an orange handle.
• Lifting the lever to the On position turns on (connects) the system power
necessary to power the Eastey EA Auto Sealer.
•
Pushing the lever down to the Off position cuts (disconnects) all power to the
system.
2.
Optional Control Power Disconnect
— This lever switch cuts (disconnects)
electrical power to the electrical control box when control box is unlatched;
connects electrical power to the electrical control box when closed and latched
shut with the lever in the horizontal position shown.
3.
Operator’s Panel
— The operator’s panel is a fully-functional color touch screen.
It displays current status information and displays buttons for configuring and
controlling the system. The Main Screen of the panel
4. E-Stop — In the event of an emergency, press in any of the large, red,
mushroom-shaped E-stop buttons to bring the system to a halt. There is an E-
Stop button on the electrical control box, as shown, and near each end of the
machine: one near the front of the infeed conveyor, and one near the rear on the
vertical column of the L-Sealer near the exit conveyor. All three buttons serve the
same function. In the event of an emergency, push the E-Stop button that you
can most readily access.
5. Conveyor Start — Large, green, palm button to start the conveyor for one-item-
at-a-time operation. See instructions for running one product at a time later in this
User Guide.
5 Conveyor
Start
4 E-Stop
Emergency Stop
E-STOP
(Red)
C
onv
ey
or
S
tar
t
(Green)