Eastey EA Professional Series, Руководство пользователя

Страница: 49 / 70

Maintenance 49
Maintenance
Weekly or Monthly Maintenance

Chains: All seal head drive chains must be oiled every month. They are located
on the seal system. Open the doors on the sealer vertical frame members to
access the chains. The power film unwinds are also chain driven and these
chains must be oiled periodically as well.

Linear Bearings: There are four (4) linear bearings on each side that slide on
linear shafts. Every month apply a lightweight oil on these shafts to keep the
shafts and bearings moving freely.
NOTE: With upper and lower bearings on each side, there are eight (8)
total linear bearings that require light lubrication.

Seal Head: After a while, film may begin to build up on the seal head. With the
seal head up to temperature, remove this buildup by wiping the seal head with a
clean rag. How often this needs to be done depends on how much the machine
is used. Check this every shift or possibly more often if the need arises.
Indications that the seal head is accumulating film buildup include poor seals with
weak or unsealed spots.
CAUTION: Never clean with any abrasive.

Pneumatic Filter: Periodically drain any water accumulation in the filter and
regulator. Press the button on the bottom of the filter and hold to drain out all
water that has accumulated in the filter bowl.
60 PSI
Filter
Regulator
Lubricator
Air Flow
0
0 10
2 8
4 6
20
40
60 80
100
120
140
psi/bar
Lubricator / Regulator / Filter
Air Pressure
Adjustment
Knob
Air FRL
(Filter /
Regulator /
Lubricator)
Water Drain
Button