Eastey EA Professional Series, Руководство пользователя

Страница: 10 / 70

10 Introduction
Introduction
General System Description
*Depending on power requirements of your sealer, a main power disconnect switch may be installed on
the other side of the L-Sealer/Exit Conveyor module, not visible from this view.
The Eastey EA Auto L-Sealer Professional Series consists of three main modules,
which may be shipped and moved independently, but which must be aligned and
synchronized to work together when placed in the final working location.
The three main modules of the Eastey EA Auto L-Sealer Professional Series are:
1. The L-Sealer and Exit Conveyor are one unit.
2. The Film Unwinder/Perforator, Infeed Conveyor, and Film Inverter are one unit.
3. The Scrap Uptake Winding Spool is a separate unit.
The Scrap Take-Up Winding Spool, which is shown winding scrap as it feeds out from
the side of the L-Sealer in the above illustration, may be repositioned at the exit end as
an option, in which case an external elbow is installed redirect exiting scrap.
Alarm Signal
Stack Lights
Scrap Film
Take-up
Spool
Conveyor Table
Adjustment Stop
Casters
Casters
Leveling Legs
Filter
Lubricator
Regulator
(Air In)
Film
Roll
Powered Film
Unwind
Inverter Height
Adjustment Wheel
Control
Panel
E-Stop
L-Seal
(Machine
Direction)
L-Seal
(Transverse
Direction)
Film
Inverter Rod
Single Item
and E-Stop
Buttons
Conveyor
Adjustment
Handle
Height
Adjust
Crank
for Scrap
Chain
Photo Emitter (Receiver
is directly below, under
conveyor.)
Leveling
Leg
Infeed
Conveyor