Eastey EA Professional Series, Руководство пользователя

Страница: 34 / 70

34 Operation
14. Pull the two leading edges of the film into the film drive chain and temporarily
open the space between the pinch wheels to insert the film between so that the
pinch wheels and drive chain will pull the film when activated.
Note: The pinch rollers should be set at the correct height and in
alignment with the scrap chain. If the pinch rollers are not at
the correct height or not aligned correctly, see the
instructions for pinch roller height and alignment
adjustment.
15. With hands and fingers away from the pinch wheels and drive chain, tap the
Scrap Chain Jog button to jog the film under control. Do not press and hold the
button or the film could begin to run continuously.
Setup for Scrap Winding
As you run the L-sealer, excess film will be cut off and exit the front of the chain drive
near the exit end. To avoid waste film from bunching up and creating an obstruction, the
scrap film is routed out near the base of the L-sealer to a free-standing scrap take-up
spool. Use the following instructions to guide the scrap film line from the end of the drive
chain down through the exit elbow (optionally elbows) to the scrap take-up spool.
1. As scrap begins to be generated, guide the scrap film down from the end of the
drive chain and through the exit elbow.
Start By
Routing
Scrap Film
Downward,
Through
Tube Elbow,
and Out Side