4
Phone:(910) 392
‐
2490
Fax: (910) 392
‐
2123
416 Landmark Drive
Wilmington, NC 28412
www.easterninstruments.com
PLEASE READ BEFORE OPERATING THE CENTRIFLOW METER
Only authorized personnel should operate Eastern Instruments equipment. Untrained per
‐
sonnel present a hazard to themselves and the equipment and improper opera on will
void the warranty.
Check for damaged parts before opera ng the meter. Any damaged part should be
properly repaired or replaced by trained personnel. Do not operate the meter if any com
‐
ponent does not appear to be func oning correctly. Contact Eastern Instruments for assis
‐
tance or for repair components.
Use the appropriate Personal Protec on Equipment as required for opera ng the meter
within its installa on loca on.
The various surfaces of the equipment may have sharp edges and have the poten al to
cause injury. Use the proper protec on for your hands when servicing or maintaining your
equipment.
The electrical panel (digital electronics) should be closed and the safety latch engaged at all
mes except during installa on or service. At those mes, only authorized personnel
should have access to the electronics panel. When power is ac vated, AC voltage may be
present throughout the panel. Therefore extreme cau on is required.
DO NOT modify or alter this equipment in any way. If modi
fi
ca ons are necessary, all
such requests must be handled by Eastern Instruments. Any modi
fi
ca on or altera on
of any Eastern Instruments equipment could lead to personal injury and/or mechanical
damage and will void the warranty.
Once power has been supplied to the equipment, it is always on and
there is a poten al that product may run through it at any me.
Avoid entering or placing body parts within the equipment or its
enclosure.
Do not operate without proper training
Always wear proper PPE
NEVER service equipment while power is connected.
SAFETY
WARNINGS AND CAUTIONS
SAFE OPERATION