background image

5

EFL Allusive 2.2m

AVVERTIMENTI E PRECAUZIONI PER LA 
SICUREZZA

Prima dell’uso leggere attentamente tutte le istruzioni 
e le precauzioni per la sicurezza. In caso contrario si 
potrebbero procurare incendi, danni o ferite.

Componenti

Usare solo componenti compatibili. Se ci fossero dubbi 
riguardo alla compatibilità, è opportuno far riferimento 
alle istruzioni relative al prodotto o ai componenti oppure 
rivolgersi al reparto Horizon Hobby di competenza.

Volo

Per sicurezza volare solo in aree molto ampie. Meglio 
se si va su campi volo autorizzati per modellismo. 
Consultare le ordinanze locali prima di scegliere una 
ubicazione.

Elica

Tenere gli oggetti liberi (vestiti, penne, cacciaviti, ecc.) 
lontano dall’elica, prima che vi restino impigliati. Bisogna 
fare attenzione anche con le mani perché c’è il rischio di 
ferirsi anche gravemente.

Batterie

Quando si maneggiano o si utilizzano le batterie, bisogna 
attenersi alle istruzioni del costruttore; il rischio è di 
procurare incendi, specialmente con le batterie Li-Po, 
con danni e ferite serie.

Piccole parti

Questo kit comprende delle parti di piccole dimensioni 
e non lo si può lasciare incustodito se c’è la presenza di 
bambini che li possono inghiottire e rimanere soffocati o 
intossicati.

RACCOMANDAZIONI PER OPERARE IN 
SICUREZZA

•  Controllare attentamente il modello prima di ogni volo 

per accertarsi che sia idoneo.

•  Essere consapevoli che un altro utente della frequenza 

in uso, potrebbe procurare delle interferenze.

•  Essere sempre cortesi e rispettosi nei confronti degli 

altri utilizzatori dell’area in cui ci si trova.

•  Scegliere un’area libera da ostacoli e abbastanza 

ampia da permettere lo svolgimento del volo in 
sicurezza.

•  Prima del volo verifi care che l’area sia libera da amici 

e spettatori.

•  Stare attenti alle altre attività che si svolgono in 

vicinanza della vostra traiettoria di volo, per evitare 
possibili confl itti.

•  Pianifi care attentamente il volo prima di lanciare il 

modello.

•  Rispettare sempre scrupolosamente le regole stabilite 

dall’associazione locale.

RIGUARDO ALLA SCELTA DI MOTORE E 
BATTERIA

Questo modello è stato provato usando i componenti 
elencati nella sezione “Sistema di propulsione” di questo 
manuale. Usando componenti all’infuori di quell’elenco, si 
potrebbe dare un carico eccessivo alla struttura. Questo 
potrebbe causare delle rotture ad alta velocità e in 
situazioni con cariche elevati. 

AVVISO

Tutte le istruzioni, le garanzie e gli altri documenti pertinenti sono soggetti a cambiamenti a totale discrezione di 
Horizon Hobby, Inc. Per una documentazione aggiornata sul prodotto, visitare il sito www.horizonhobby.com e fare 
clic sulla sezione Support per questo prodotto.

Signifi cato dei termini particolari

In tutta la documentazione relativa al prodotto sono utilizzati i seguenti termini per indicare vari livelli di potenziale 
pericolo durante il funzionamento:

AVVISO

: Procedure che, se non sono seguite correttamente, possono creare danni materiali E nessuna o scarsa 

possibilità di lesioni.

ATTENZIONE

: Procedure che, se non sono seguite correttamente, possono creare danni materiali E possibili 

gravi lesioni.

AVVERTENZA

: Procedure che, se non debitamente seguite, espongono alla possibilità di danni alla proprietà 

fi sica o possono omportare un’elevata possibilità di provocare ferite superfi ciali. Ulteriori precauzioni per la 
sicurezza e avvertenze.

AVVERTENZA

: Leggere TUTTO il manuale di istruzioni e prendere familiarità con le caratteristiche del 

prodotto, prima di farlo funzionare. Un utilizzo scorretto del prodotto può causare danni al prodotto stesso, 

alle persone o alle cose, provocando gravi lesioni.

Questo è un prodotto di hobbistica sofi sticato e NON un giocattolo. È necessario farlo funzionare con cautela e 
responsabilità e avere conoscenze basilari di meccanica. Se questo prodotto non è utilizzato in maniera sicura 
e responsabile potrebbero verifi carsi lesioni o danni al prodotto stesso o ad altre proprietà. Non è un prodotto 
adatto a essere utilizzato dai bambini senza la diretta supervisione di un adulto. Non usare componenti non 
compatibili o alterare il prodotto in nessuna maniera al di fuori delle istruzioni fornite da Horizon Hobby, Inc. Questo 
manuale contiene le istruzioni per un funzionamento e una manutenzione sicuri. È fondamentale leggere e seguire 
tutte le istruzioni e le avvertenze del manuale prima di montare, confi gurare o far funzionare il Prodotto, al fi ne di 
utilizzarlo correttamente e di evitare danni o lesioni gravi.

Almeno 14 anni. Non è un giocattolo.

COME USARE IL MANUALE

Questo manuale è diviso in sezioni per rendere più facile la comprensione del montaggio. Vicino ad ogni passo sono 
stati posti dei piccoli quadrati (

‰

) per aiutare a tenere traccia delle cose fatte e di quelle da fare.

Содержание Allusive 2.2m





































Отзывы: