- 48 -
DXE-EA15-4P - Earth Anchor, Package of 4
Utilize these earth anchors with STI Double-braided Polyester ropes to build a custom guying system for
your vertical antenna. 15” long x 3” diameter.
Optional Accessory Items
JTL-12555 Jet-Lube
™
SS-30 Pure Copper Anti-Seize
Jet-Lube
™
SS-30 Pure Copper Anti-Seize is the top choice of engineers and technicians in government, industry and leading Amateur
Radio contest stations, for protecting mechanical assemblies of aluminum tubing, general hardware and copper grounding
systems. On bonded metal surfaces Jet-Lube
™
SS-30 assures electrical and RF conductivity while preventing oxidation
and corrosion. Surpassing the capabilities of other aluminum anti-oxidants, the wide temperature range of Jet-Lube
™
SS-
30 prevents long-term drying and caking, and allows easy disassembly and effortless cleaning of parts. An
environmentally preferred thread lubricant and conductive termination compound, Jet-Lube
™
SS-30 helps keep your
equipment in serviceable condition. It contains a high concentration of copper flakes, a requirement for heavy loads or
compression; controlled frictional characteristics allow the surfaces of nuts and bolts to be tightened to their design torque
specifications. This anti-seize product assures full hydraulic efficiency by allowing the metal surfaces to slide over each
other without damaging metal-to-metal contact. Jet-Lube
™
SS-30 is also designed to work as a similar and dissimilar
component between two metal surfaces to prevent seizing and galvanic action. The SS-30 compound formula improves
conductivity and ground continuity - and will not melt in high temperatures.
Jet-Lube
™
SS-30 Pure Copper Anti-Seize Features include:
* Meets MIL-PRF-907E spec
* K-factor: 0.13
* Service rating: -65 degrees F (-54 degrees C) to 1800 degrees F (820 degrees C)
* SS-30 Resistivity (ohm-CM x 108) 5
* This product is limited to domestic UPS Ground shipping only
DXE-T001 - DX Engineering SO-239 Connector Installation Tool Kit
This DX Engineering SO-239 connector installation tool kit offers an easier installation of chassis or bulkhead mount SO-239 coaxial
connectors. Having the right tools can make all of the difference in your shack, and this handy DXE tool
provides you with a special dual-use stainless steel wrench, plus a multipurpose 6-in-1 screwdriver/nut
driver tool. One end of the wrench is a 3/4 in. semi-box wrench with a pass-through for coaxial cable--
perfect for tightening the larger nuts used to mount bulkhead connectors. The other end is a 3/16 in. box
wrench for tightening mounting nuts with SO-239 hardware. You'll receive six combinations - two Phillips
heads, two flatheads, and a 1/4 in. nut driver and a 5/16 in. nut driver, which store in the handle of the
screwdriver. The added SO-239 wrench is ideal for use with the
DXE-UHF-FDFB-KIT
- Silver Plated
Female SecureMount
™
Bulkhead Connector.
DXE-RADW - 500K or 1000K Radial Wire Kits and Components
To achieve optimal performance with a ground-mounted vertical, install as many radials as possible. These bulk radial wire kits
use insulated wire that is UV resistant, hard to see and lays down easily, unlike the wire that is commonly available at the big box
stores. It will last much longer in contact with soil than bare wire.
The DXE-RADW- 500K or 1000K kit provide everything you will need to build the perfect radial system!
500/1000 ft. spool of 14 AWG, stranded copper wire with vinyl insulation
20/40 lugs
100/200 radial wire anchor pins- Eliminating the need to bury your radials!
Build up to 20/40 radials, 25 feet long
DXE-RADW-500K
Bulk Radial Wire Kit, 500 ft Spool of Wire, 20 Lugs, 100 Staples
DXE-RADW-1000K
Bulk Radial Wire Kit, 1000 ft Spool of Wire, 40 Lugs, 200 Staples
