- 32 -
Notes on the capacity hat assembly:
Two threaded rods are installed (centered) in the drilled holes.
Each side of the threaded rod will get one of the 39 foot wires with ring terminal and be held
in place using an external tooth washer and a stainless steel hex nut as shown.
Aluminum spacers are pressed into the patented insulators as shown.
Note the positioning of the patented insulators (
look carefully for cupped area
).
Prior to installing the four patented insulators on the two threaded rods, one end of the 39
foot wires will be routed through the patented insulators.
The following pictures detail the assembly of the capacity hat assembly
Exploded view
