- 24 -
8. Locate two
DXE-ECL-2000
Stainless Steel Element Clamps, one
DXE-ECL-1750
Stainless
Steel Element Clamp and the 1.75" OD x 72" element tube that was marked in step 7.
Slide the two
DXE-ECL-2000
element clamps over the 2" OD element. Slide the one
DXE-
ECL-1750
element clamp over the 1.75" OD element. Slide the 1.75" OD element inside the 2"
OD element tube to the mark made at 4". Tighten the two
DXE-ECL-2000
clamps in place. Do
not over-tighten which may cause clamp damage. This element tubing joint uses a second clamp
to ensure proper element position. Slide the
DXE-ECL-1750
next to the joint between the 2"
OD element tube and 1.75" OD element tube. Tighten the clamp in place. This third clamp
ensures that the 1.75" section cannot slip further inside the 2" OD section.
9. Locate the aluminum Guy Ring, two
DXE-ECL-1750
Stainless Steel Element Clamps, one
DXE-ECL-1500
Stainless Steel Element Clamp and the 1.5" OD x 72 long element.
Slide the two
DXE-ECL-1750
clamps over the 1.75" OD element tube. Slide the Guy Ring and
the
DXE-ECL-1500
clamp over the 1.5" OD element tube. Tighten the two
DXE-ECL-1750
clamps in place. Do not over-tighten which may cause clamp damage. Slide the Guy Ring next
to the joint between the 1.75" OD element tube and 1.5" OD element tube. The
DXE-ECL-1500
clamp is then snugged up next to the Guy Ring and tightened in place.
