- 16 -
4. The hardware does not have to be removed from the manual winch to either install or remove
the manual winch from the winch mounting plate.
5. There are three holes with slots in the mounting bracket. The flat washers will fit through the
large holes. Once in place, push the winch inward (toward the antenna elements) allowing the
three bolts to go into the three slots. Tighten the hardware to hold the winch in place.
6. Connect the Hook from the manual winch strap to the Antenna Hook Mount as shown below.
Crank the strap so it is snug and not loose.
To remove the winch,
simply reverse this sequence.
The manual winch should be
removed and stored when not in use to
protect the gears and web strap from
weather and environmental effects.
