SPA Actuator with Intelli-Motion™ Technology Manual R00
May 2022
Page 21 of 48
4.2.2 Adding the SPA with Intelli-Motion to a Studio 5000™ Project
NOTE: This section of the manual (Adding the SPA with Intelli-Motion to a Studio 5000 Project) is for reference only.
CMCO does not control Studio 5000 and changes to menus, look, or operation, could be made at any time.
In Rockwell Studio 5000, create a new project or open the project that you would like to add the SPA with Intelli-Motion
to. Under I/O Configuration, locate the row that says “Ethernet.” Right-click on it and click on “New Module” in the menu,
as shown below.
In the pop-up window, locate the iSPA with Intelli-Motion file. Right-click on it, then click on “Create.” If the iSPA with
Intelli-Motion EDS file is not found, see
