| 107
Label Cut Dust
Label cut dust can accumulate at any place along the cut path.
Paper media creates more dust than synthetic material. Dust build up does not cause any specific
immediate problems but it can eventually cause problems with the moving parts and electronics in the
cutter.
Periodically vacuum the cutter area and rollers.
Cleaning the Printer
The case of the printer can be cleaned with an ammonia based window cleaner and a lint-free cloth.
Over time, ink overspray may gather at the base of the printer. The printer is designed using a vacuum
system to gather most of this ink on a series of saturation pads. Eventually, these pads may need to be
replaced. Contact tech support to determine if pad replacement is necessary.
Содержание LX610e
