Drobo 5N2 Скачать руководство пользователя страница 80

Страница: 80 / 213

Drobo5N2 User Guide

15.

The application will prompt you to register your Drobo 5N2. You can either register it or skip the

step and register it later. Select an option based on you preference.

Note:

We highly recommend to register your product in order to obtain support.

16.

Click the Next button to view the

All Drobos

page. After a few seconds, Drobo "discovers" all

Drobo devices currently connected and displays them on this page.

Note:

After the Drobo Dashboard launches, you may be asked if Drobo can collect anonymous

information on your usage. Click

Yes

, as desired.

17.

If you have no Drobo device connected to the computer or powered on, a "No Drobos Detected"

message displays until you do.

18.

Your Drobo 5N2 will not work until you upgrade the firmware. For information on updating the

firmware to the latest version, see Updating your Drobo 5N2 to the latest firmware.

Содержание 5N2






















































































































































































































Результаты поиска

Содержание 5N2

Отзывы:

Drobo 5N2, Руководство пользователя, Страница: 80 / 213

Результаты поиска

Содержание 5N2

Отзывы: