DRC D 1000LF Скачать руководство пользователя страница 98

Страница: 98 / 102

Version 5.01 – July 2012 / SW Version: 2012.06.12Errore. Per applicare Nadpis 1 al testo da visualizzare in questo punto, utilizzare la scheda Home.

98/102

IMPORTANT NOTES:

After firmware had been updated, it is advisable to rename the “D1000”

folder on the USB memory stick to “D1000.yyyy.mm.dd”. This assures, that

it will remain as a backup and will not be changed during next connection to

the instrument later.

Every time during the firmware update (even with new empty USB

memory stick with no firmware), all saved records (pictures with

settings etc.) will be saved to the USB memory stick in the

“/D1000/pictures” folder (if there is enough space on the USB memory

stick) and at the same time all records will be erased in the instrument.

The USB SDERVICE function may be used also to move All picture records

to the USB device at once. In this case, it is advisable to use “empty” USB

device with NO D1000 folder – it will be created automatically. Otherwise,

the firmware will be always “re-updated” at each start of USB SERVICE.

Records from the USB memory stick may be downloaded back to the

instrument – follow the procedure described in 10.4. Load Records From

USB Memory Stick.

Содержание D 1000LF







































































































Результаты поиска

Содержание D 1000LF

Отзывы:

DRC D 1000LF, Руководство по эксплуатации, Страница: 98 / 102

Результаты поиска

Содержание D 1000LF

Отзывы: