DRC D 1000LF Скачать руководство пользователя страница 86 | Manualshive

Страница: 86 / 102

DRC D 1000LF Скачать руководство пользователя страница 86

Version 5.01 – July 2012 / SW Version: 201

© DRC Srl 2012

8.4 PA MODE – Chan S

This mode enables to select a specific group of elements within PA probe.

In  order  to  switch  ON  the
RX  mode,  activate  the  PA  (Phased  Array)
mode first – see 8.1, then depress the right
(grey) control key next to the “PA
the  display.  The  PA MODE  has  changed  to
“Chan SEL TX & RX”.

One  more  additional  parameter  appeare
APERTURE.  The  APERTURE  enables  to
change  the  number  of  active  elements
within PA probe and, thus, “create” a probe
with

variable

width.

“N..M TX&RX”  just  under  the
indicates the “position” range of such group
of  elements  in  the  probe,  which
moved  within  1

st

to 16

th

appropriate grey and yellow Control Keys
Example shows elements 3 to 5 with
APERTURE 3.

All chosen elements transmit and receive
non-phased waves.

APERTURE=1 serves to check
element separately, whether
proper coupling etc.

After

L-scan

(Linear scan)

activated (green), all positions within the
probe are cyclically activated, e.g. there are
16 positions for APERTURE=1 and A
are displayed from each sound beam.
PA[1..16] Control Keys serve

cursor for A-scan display from the specified
step (element).

This  mode  may  be  used  for  fast  scanning
using big wide probe (like a paint
testing  thickness,  laminations  etc.
be  anything  below  the  probe,  the  back
echo  position  will  be  changed
then  all  16  rows  are  similar,  with  red  back
wall echo only.

SW Version: 2012.06.12Errore. Per applicare Nadpis 1 al testo da visualizzare in questo punto, utilizzare la scheda Home.

SEL TX & RX Mode

This mode enables to select a specific group of elements within PA probe.

“Chan SEL TX &

PA (Phased Array)

, then depress the right

(grey) control key next to the “PA MODE” on

MODE has changed to

One more additional parameter appeared –

. The APERTURE enables to

e the number of active elements

within PA probe and, thus, “create” a probe

The

indication

TX&RX” just under the PA[1..16]

indicates the “position” range of such group
of elements in the probe, which may be

th

element using

appropriate grey and yellow Control Keys.
Example shows elements 3 to 5 with

All chosen elements transmit and receive

APERTURE=1 serves to check each

, whether it works, have

(Linear scan) had been

), all positions within the

probe are cyclically activated, e.g. there are
16 positions for APERTURE=1 and A-scans

ch sound beam. Then

Control Keys serve to move the

scan display from the specified

This mode may be used for fast scanning
using big wide probe (like a paint-brush) for
testing thickness, laminations etc. – would

nything below the probe, the back-wall

echo position will be changed; if all is OK,
then all 16 rows are similar, with red back-

|

|

Per applicare Nadpis 1 al testo da visualizzare in questo punto, utilizzare la scheda Home.

86/102

This mode enables to select a specific group of elements within PA probe.

|

«
...
84
85
86
87
88
...
»

Содержание D 1000LF







































































































Отзывы:

Нет отзывов