DRC D 1000LF Скачать руководство пользователя страница 94 | Manualshive

Страница: 94 / 102

DRC D 1000LF Скачать руководство пользователя страница 94

Version 5.01 – July 2012 / SW Version: 2012.06.12Errore. Per applicare Nadpis 1 al testo da visualizzare in questo punto, utilizzare la scheda Home.

© DRC Srl 2012

94/102

9. Management of Configuration Files (Setups)

All configuration files (setups) are stored in 9 groups, 6 setups in each (see 3.6.1).

Depress the

key for access to the special mode (see 3.10) and then depress

SETUPS

key for access to “MANAGEMENT OF CONFIGURATION FILES

(SETUPS)” table.

The actual group number is highlighted on the display in the bottom left corner, e.g.

GROUP 0

.

The actual group number may be selected using Control keys (yellow and grey) next

to the green

GROUP

.

Saved setups are highlighted (with yellow background) and may have names and/or

descriptions (if had been saved with names and/or descriptions).

Possible actions are as follows:

-

QUIT

key – return to the basic mode;

-

DEFAULT

– force default setup:

the

FORCE DEFAULT SETUP ?

menu will be displayed with options:

-

YES

– force default setup,

-

CANCEL

– return to the main “MANAGEMENT OF CONFIGURATION FILES

(SETUPS)” table;

-

DEL ALL

– delete the actual setup or all setups in 10 groups:

the

DELETE SETUPS ?

menu will be displayed with options:

-

ALL GRP

– delete all setups from all groups,

-

GROUP X

– delete all setups from the actual group,

-

CANCEL

– return to the main “MANAGEMENT OF CONFIGURATION FILES

(SETUPS)” table;

-

STP->USB

– send setups to the USB port (USB flash memory stick shall be

connected before depressing this key);

-

STP<-USB

– download setups from the USB port (USB flash memory stick shall

be connected before depressing this key).

NOTE: In order to return to the basic mode, the “Esc” key may be used instead of

the

QUIT

key.

?

«
...
92
93
94
95
96
...
»

Содержание D 1000LF







































































































Отзывы:

Нет отзывов