DRC D 1000LF Скачать руководство пользователя страница 16

Страница: 16 / 102

Version 5.01 – July 2012 / SW Version: 2012.06.12Errore. Per applicare Nadpis 1 al testo da visualizzare in questo punto, utilizzare la scheda Home.

16/102

3.2

Escape Key

Within the Basic MENU, after

key had been depressed, the instrument may be

switched OFF with or without saving the actual settings.

SAVE & EXIT & OFF

message

will be displayed at the display bottom. Depress the appropriate yellow Execution Key:

YES

– the instrument will be switched OFF with saving last settings conditions;

CANCEL

– return to the previous operation mode.

Within any other menu,

key will turn back into the Basic MENU – see 4.1.

3.3

Execution Keys

These keys provide execution of the menu item displayed just above them.

NOTE: Hereinafter, should be any execution key depressed, it will be

referenced as menu item just above the required execution key.

3.4

Display Freeze

The actual waveform may be “frozen” by

short depressing

key (the red indicator

*FROZEN*

is displayed in the Status Window).

Then the complete display content may be

saved to the memory. Depress

key

shortly to “defrost” the screen.

Depressing

key for time longer than 1 sec

switches  the  instrument  to  peak  freezing
mode  –  maximum  (peak)  echo  amplitudes
will  be  “collected”  in  this  mode  (the  red
indicator

*PEAKS*

is displayed in the Status

Window).

Next short depressing of

key allows to

freeze and save actual picture (the red
indicator

*FROZEN PEAKS*

is displayed in the

Status Window). Depress

key shortly to

“defrost” the screen.

Esc

Содержание D 1000LF







































































































Результаты поиска

Содержание D 1000LF

Отзывы:

DRC D 1000LF, Руководство по эксплуатации, Страница: 16 / 102

Результаты поиска

Содержание D 1000LF

Отзывы: