DRC D 1000LF Скачать руководство пользователя страница 76

Страница: 76 / 102

Version 5.01 – July 2012 / SW Version: 2012.06.12Errore. Per applicare Nadpis 1 al testo da visualizzare in questo punto, utilizzare la scheda Home.

76/102

7.5 AWS Mode – Evaluation of “d” value acc. to AWS Code

Notes:

API 5UE mode shall be “OFF” – see 4.8. CURVES Sub-Menu (SETTING).

DGS mode shall be “OFF” – see 4.8. CURVES Sub-Menu (SETTING).

All previous DAC curve settings will be deleted after the AWS mode has

been activated.

The slope of AWS evaluation curve is 2 dB/in. (2 dB/25 mm).

Classification tables had been adopted from the AWS D1.1/D.1.1M:2002,

Table 6.13.1 and 6.13.2.

1. When the instrument is calibrated with appropriate probe, depress the

SETTING

button.

2. Depress the

CURVES

button.

3. Make sure that the API 5UE mode is

OFF.

4. Switch the AWS MODE to ON.

5. Return to the Basic Menu (depress

the

SETTING

button twice).

6. The

DAC

button had changed to

AWS

7. Depress the

AWS

button (

AWS

8. Make sure that TR.CORR (transfer

correction) is set to 0.0 dB.

9. Place the transducer on a calibration block containing reference reflector and

locate the reflector.

10. Swivel the transducer to peak the echo.

11. Depress “--- ADD” button to record the reference point. The reference

evaluation curve appears at the echo peak level, with “AWS REF” indicator

just above the "DEL ---".

12. The measured value is displayed in the Status Window as “

AWS d=…

”

13. If CLASS DISP is ENABLE and AWS value had been measured and is valid,

then corresponding classification A, B, C, D is calculated and displayed as

yellow-black next to the result.

Содержание D 1000LF







































































































Результаты поиска

Содержание D 1000LF

Отзывы:

DRC D 1000LF, Руководство по эксплуатации, Страница: 76 / 102

Результаты поиска

Содержание D 1000LF

Отзывы: