Doosan B20S-3, Спецификации систем эксплуатации, испытания и регулировка, Страница: 2 / 123

1 MicroController Control System Specifications
Important Safety Information
Most accidents involving product operation, maintenance and repair are caused by failure to observe basic safety rules
or precautions. An accident can often be avoided by recognizing potentially hazardous situations before an accident
occurs. A person must be alert to potential hazards. This person should also have the necessary training, skill and tools
to perform these functions properly.
Improper operation, Iubrication, maintenance or repair of this product can be dangerous and could result in
injury or death.
Do not operater or perform any lubrication, maintenance or repair on this product, until you have read and
understood the operation, lubrication, maintenance and repair information.
Safety precautions and warnings are provided in this manual and on the product. If these hazard warnings are not
heeded, bodily injury or death could occur to you or other persons.
The hazards are identified by the “Safety Alert Symbol” and followed by a “Signal Word” such as “WARNING” as shown
below.
The meaning of this safety alert symbol is as follows :
Attention! Become Alert! Your Safety is Involved.
The message that appears under the warning, explaining the hazard, can be either written or pictorially presented.
Operations that may cause product damage are identified by NOTICE labels on the product and in this publication.
DAEWOO cannot anticipate every possible circumstance that might involve a potential hazard. The warnings in this
pulication and on the product are therefore not all inclusive. If a tool, procedure, workmethod or operating technique
not specifically recommended by DAEWOO is used, you must satisfy yourself that it is safe for you and others.
ou should also ensure that the product will not be damaged or made unsafe by the operation, lubrication,
maintenance or repair procedures you choose.
The information, specifications, and illustrations in this publication are on the basis of information available at the
time it was written. The specifications, torques, pressures, measurements, adjustments, illustrations, and other
items can change at any time. These changes can affect the service given to the product. Obtain the complete and
most current information before starting any job. DAEWOO dealers have the most current information available.
WARNING