Doosan B20S-3, Спецификации систем эксплуатации, испытания и регулировка, Страница: 111 / 123

110 MicroController Control System Testing And Adjusting
Description of SET OPTIONS Functions
<DRIVE CONTROLLER>
Function Option Meaning
BYPASS Bypass contactor adopted.
WEAKENING NOT AVAILABLE
2. SPEED CONTROL - NOT AVAILABLE
Activates the check that reads the battery voltage in standby.
ON When the residual charge is less than 10%, the maximum
current is reduced by 70% and the LED blinks continuously.
OFF No low battery charge alarm.
ON Activates anti-rollback function.
OFF No anti-rollback
Braking active at the moment of accelerator pedal release with
increment of the braking current by means of the brake pedal.
OFF No regenerative braking at accelerator pedal release.
RUNNING Hour meter only active when running.
KEY ON Hour meter active with the key on.
Interrupt function for the truck when the key switch turn on
SEAT without an operator on the seat or while no one is on the seat
during 6 sec. under the key on.
HANDLE NOT AVAILABLE
8. SOFT BRAKING - NOT AVAILABLE
9. AUX FUNCTION - NOT AVAILABLE
<PUMP CONTROLLER>
Function Option Meaning
1. BYPASS CONTACTOR - NOT AVAILABLE
Activates the check that reads the battery voltage in standby.
ON When the residual charge is less than 10%, the maximum
current is reduced by 70% and the LED blinks continuously.
OFF No low battery charge alarm
RUNNING Hour meter only active when running.
KEY ON Hour meter active with the key on.
4. MAIN CONTACTOR - NOT AVAILABLE
5. AUX FUNCTION - NOT AVAILABLE
3. BATTERY CHECK
1. BYPASS CONTACTOR
4. ANTIROLLBACK
5. RELEASE BRAKING
6. HOUR COUNTER
7. SAFETY SWITCH
ON
2. BATTERY CHECK
3. HOUR COUNTER