123
Securi
ty S
e
tt
in
gs
1
m
Set./Service
Incoming call
Ring time
Do the following operations.
+
m
-
9
-
0
<Ring Time>
Delaying Start of Ringing Operation
Ring start time
You can set the FOMA terminal not to start ringing operation
immediately for when a voice call or videophone call comes in
from the party whose phone number is not stored in the
Phonebook. This function is effective as a countermeasure for
blocking nuisance calls such as one ring phone scam (one-giri).
ON or OFF
Enter a start time (seconds).
Enter from “01” through “99” in two digits.
Missed calls display
You can set whether to display the call disconnected within the
time specified for “Ring start time” in Received Calls.
Display or Not display
Information
When a call comes in from the party whose phone number is stored in the
Phonebook, the FOMA terminal starts ringing as soon as the call comes in even if
“186”/“184” is added to the phone number. However, during Personal Data Lock
(except for when you set “Phonebook available” to “Accept” for “Customize”), or for
the call from the party whose phone number is stored as secret data, ringing starts
according to the setting for this function.
If the ring start time is longer than the ring time for Record Message Setting, the
ringing operations do not start, activating Record Message instead. To activate
Record Message after starting the ringing operations, set the longer ring time for
Record Message Setting than the ring start time. The same applies to the ring time for
Voice Mail Service, Call Forwarding Service, and Auto Answer Setting.
You can reject voice calls and videophone calls from the party whose
phone number is not stored in the Phonebook.
This function is valid only when the other party notifies his/her phone
number. It is advisable to activate “Caller ID request” and “Call setting
w/o ID” simultaneously.
1
m
Set./Service
Lock/Security
Reject unknown
Enter your Terminal Security Code
Accept or Reject
<Reject Unknown>
Rejecting Incoming Calls from Phone
Numbers which are not Stored in
Phonebooks
Information
If a call comes in from the party whose phone number is stored as secret data, the call
is not rejected, regardless of this setting.
If you simultaneously activate “Reject unknown” and “Call acceptance” of
“Restrictions”, the latter has priority.
When a call comes in from anyone whose phone number is not stored in the
Phonebook while you set this function to “Reject”, the call is stored in “Received calls”
as a missed call record, and the “Missed call” icon appears on the Stand-by display.
Also, the caller hears a busy tone even if you have set Voice Mail Service or Call
Forwarding Service to “Activate”. However, if you set the ring time for Voice Mail
Service or Call Forwarding Service to 0 seconds, when the FOMA terminal is out of
the service area, or when the power is turned off, the busy tone will not be played
back, activating Voice Mail Service or Call Forwarding Service.
Even when this function is set to “Reject”, the FOMA terminal follows the setting of
“Call setting w/o ID” if each setting of “Call setting w/o ID” is set to “Accept”.
You can receive SMS and i-mode mail messages regardless of this setting.
You cannot set “Reject unknown” during Personal Data Lock.
You cannot set “Reject unknown” to “Reject” while “Ring start time” of “Ring time” is
set to “ON”.
