81
Ph
on
ebo
ok
Illumination
You can set an illumination pattern for when a voice call or
videophone call comes in from the person stored in the
Phonebook.
Select illumination
Select an item.
To release the stored illumination, select “Release illumination”.
Picture
You can set an image to be displayed for when a call comes in
from the person stored in the Phonebook.
Select picture
Select a type of image
Select a folder
Select an image.
To release the stored image, select “Release picture”.
Chara-den
The stored Chara-den image is displayed as a substitute image
for videophone calls with the person stored in the Phonebook.
Select Chara-den
Select a Chara-den image.
To release the stored Chara-den image, select “Release
Chara-den”.
Mail ring tone
You can set a ring tone for when a mail message comes in from
the person stored in the Phonebook.
Select ring tone
Go to step 2 on page 92.
To release the stored mail ring tone, select “Release ring tone”.
Mail vibrator
You can set a vibration pattern for when a mail message comes
in from the person stored in the Phonebook.
Select vibrator
Select a vibration pattern.
To release the stored mail vibrator, select “Release vibrator”.
Mail illumination
You can set an illumination pattern for when a mail message
comes in from the person stored in the Phonebook.
Select illumination
Select an item.
To release the stored mail illumination, select “Release
illumination”.
3
Press
l
(
).
If you have not entered any name, “
” is not displayed and you cannot
store the entry.
When the low battery alarm sounds
The Phonebook entry you are editing is saved automatically. The confirmation display
appears asking whether to resume editing when you continue editing after charging the
battery or when you operate step 1 on page 78 and select the storage location for the
interrupted Phonebook entry after changing to a charged battery.
Recall. . . . You can resume editing the Phonebook entry.
New . . . . . You can edit a new Phonebook entry. In this case, the interrupted data is
retained. If you execute “Add to phonebook” after storing the new Phonebook
entry, the confirmation display appears again.
Only the most recently interrupted entry is retained.
If you resume editing the data but then cancel editing without storing it, that data will be
abandoned. Once you recall the data, be sure to store it.
If you receive a call or mail
You can respond it leaving the edited data as it is, thanks to the Multitask function.
To return to the Phonebook Edit display, press and hold
x
for at least one second to
switch the menu. You can return to the Phonebook Edit display also by ending the call or
mail function.
Answer
message
You can set an answer message for Record Message by
Phonebook entry.
Select answer message
Select an answer message.
To release the stored answer message, select “Release answer
message”.
Phonebook entries while editing
