45
Before Using the
Handset
2
Enter year, month, date and time.
Use
M
o
to move the cursor and enter numbers by the
numeric keys.
To enter one-digit numeral for the date and time, enter
two digits beginning with “0” as in “01” through “09”.
Highlight “Time zone” and press
l
(
) to set the
time zone. Use
M
o
to select a region and press
O
o
(
).
This function corrects the time of the FOMA terminal according to the clock information
obtained from the network when you turn on the power.
The time is corrected when you show the Stand-by display with “Auto time adjust ON”
set.
If the time is not corrected for a while after you turn on the power, turn it off and then on
again.
Some few second errors might occur. You might not be able to correct the time depending
on the radio wave conditions, or the i-
α
ppli program set for the i-
α
ppli Stand-by display.
When you receive the clock information overseas and the time difference correction
information differs from the previously received one, “Time is adjusted” is displayed and
the time difference is corrected automatically. Press “OK” to update the time and show
Redial, Dialed Calls, Received Calls, sent/received mail messages and others in local
time.
Depending on the overseas carrier, the time difference might not be correctly adjusted.
In such a case, set a time zone manually.
About date/time correction function
Information
Unless Set Time is set, the functions which use the clock such as Schedule do not
work correctly. Further, the date/time for redial items and received call records are not
stored.
The set time is retained even when the battery pack is replaced, however, it might be
reset if the battery pack is left removed for a long time. In that case, charge the FOMA
terminal and then perform the clock setting.
When “Time zone” is set to other than “GMT +9” or the time difference is corrected
overseas, the sub clock (Japanese date/time, etc.) is displayed on the Stand-by
display.
This function supports clock settings from 00:00 on January 1, 2009 through 23:59 on
December 31, 2037.
You can display the time of the specified area on the Stand-by display.
1
m
Set./Service
Clock
World time watch
ON or OFF
Use
M
o
to select an area and press
O
o
(
).
You can advance the time displayed for the overseas country you stay
and for a region of World Time Watch by one hour.
1
m
Set./Service
Clock
Summer time
ON or OFF
You can set the FOMA terminal to send your phone number to the called
party’s phone when dialing. Your phone number is important
information, so take utmost care when notifying your phone number.
This function is available only when the other party’s phone supports
Caller ID.
<World Time Watch>
Displaying World Time
Information
World Time Watch does not appear when “Display setting”
→
“Clock”
→
“Stand-by
clock”
→
“Position” is set to “OFF”, or when you use the FOMA terminal overseas.
Summer Time
<Caller ID Notification>
Notifying the Other Party of Your Phone
Number
