169
Mai
l
Receive entry
You can register Message IDs for receiving information other
than Quake Early Warning and Disaster/Evacuation. You can
register up to 20 IDs.
You do not need to operate “Receive entry” for receiving
only Quake Early Warning and Disaster/Evacuation.
<New>
Enter your Terminal Security Code
Enter a registration name
Enter a Message ID.
To edit a registered Message ID, highlight it, press
l
(
), and then enter your Terminal Security Code.
You can enter up to 15 full-pitch/30 half-pitch characters for
an arbitrary registration name. For a Message ID, enter 4
half-pitch characters specified by the service provider.
You can edit it also by selecting “Edit” from the Function
menu. Select “Delete this” or “Delete all” and enter your
Terminal Security Code. Then you can delete one or all
Message IDs.
You cannot edit/delete “Quake Early Warning” and
“Disaster/Evacuation”.
Information
<Receive entry>
The buzzer does not sound when you receive a quake early warning when “Follow
each mode set.” is set with the manner setting by “Manner mode” or “Super silent”.
However, the buzzer sounds with “Original” set to sound any of the following tones.
When every setting is set to mute, the buzzer does not sound:
・
Phone volume
・
Mail volume
・
Alarm volume
・
Memo tone
・
Keypad sound
Even when “Follow each mode set.” is set and “Vibrator” of “Original” is set to “OFF”,
the vibrator works if you receive a quake early warning.
You can send or receive chat mail messages to and from multiple
persons on a single display. To use Chat Mail, you need to store chat
members. You can easily store them by creating chat groups.
You can store up to six chat members including the user (yourself).
1
l
Chat mail
i
(
)
Chat member
<Not recorded>
Enter a mail address.
To edit a stored member, select the member.
When the mail address is “phone
[email protected]”, store the phone number only.
You can enter up to 50 half-pitch characters.
<Chat Mail>
Using Chat Mail
Store Chat Members
Chat Member list
Information
If you edit the mail address of the stored member, the member’s name and image are
changed.
