221
Ca
mer
a
You can set the camera when shooting images.
You can display the image through the camera in “WIDE” or “TELE”.
The maximum magnification for each size is as follows:
1
Finder display
Use
N
o
to adjust the magnification.
Changing Settings for Shooting
Use Zoom
Camera mode
Size
Level of zoom
The maximum
magnifications
(Approx.)
Photo
3M (1536 x 2048)
1 level
1.0 time
2M Wide (1920 x 1080)
1 level
1.0 time
2M (1200 x 1600)
6 levels
1.2 times
1M (960 x 1280)
11 levels
1.6 times
Stand-by (480 x 854)
6 levels
1.2 times
VGA (640 x 480)
11 levels
1.6 times
QVGA (240 x 320)
21 levels
3.2 times
QCIF (176 x 144)
31 levels
5.3 times
Sub-QCIF (128 x 96)
31 levels
8.0 times
Continuous
VGA (480 x 640)
11 levels
1.6 times
QVGA (240 x 320)
21 levels
3.2 times
QCIF (144 x 176)
31 levels
5.3 times
Sub-QCIF (96 x 128)
31 levels
8.0 times
Movie
VGA (640 x 480)
11 levels
1.6 times
HVGA Wide (640 x 352)
11 levels
1.6 times
QVGA (320 x 240)
21 levels
2.4 times
QCIF (176 x 144)
31 levels
4.3 times
Sub-QCIF (128 x 96)
31 levels
6.0 times
Videophone call
-
31 levels
4.3 times
Information
The image quality may slightly change when you select “WIDE” or “TELE”.
You can shoot with the camera which focuses on a subject.
When “Focus” is set to “Face detection”, faces are detected in the first place. When a
face is detected, the yellow frame is shown. Up to three faces are detected, and the
image is shot with a single face of them automatically focused according to the face
size and position. When multiple faces of people are found, the frame for a face to be
focused becomes yellow. When the detection fails, the focus function works in “Auto”.
The focus function works when you shoot a subject about 10 cm or more away.
1
Finder display
X
o
or
a
When a subject is focused, a focus lock tone sounds, the frame becomes green,
and the focus is locked.
When the subject is not focused, the frame becomes red.
To cancel the focus locked by pressing
X
o
or
a
, press
r
.
“TELE” is released in the following cases:
・
When you press
-
h
to end the camera
・
When a size is changed
・
When camera mode is switched
Use Focus Function
Information
Information
If “Movie type set” is set to “Voice” in Movie Mode, you cannot use the focus function.
“Face detection” is available only in Photo Mode.
Even when “Focus” is set to “Face detection”, you might not be able to detect the face
in the following cases:
・
When the face faces sideway or askew
・
When the face is at a slant
・
When part of the face is covered by glasses, a cap, or shadows
・
When the face is extremely small, large, or dim when compared to overall screen
size
・
When the face is placed at the edges of the display
The distance that faces can be detected by “Face detection” is within about 2.5 m.