224
Camera
Information
<Photo mode>
Even if you change the setting of “Brightness”, “White balance”, “Color mode set”, or
“Focus”, each setting changes to appropriate one for each shooting mode when you
change “Photo mode”.
Note that the image may blur in Night Mode because the exposure takes a longer time.
<File size setting>
When “Long time” is set, “Store in” is set to “microSD”. If you switch “File size setting”
to other than “Long time” without ending the camera, “Store in” returns to “Phone”.
<Img. stabilizer>
Image Stabilizer function is only for decreasing the degree of camera shake, so its
effect differs depending on the subject or condition.
Image Stabilizer might not work effectively in the following cases:
・
When the camera shakes to a great extent
・
When zooming is in use
・
When shooting moving subjects
“Img. stabilizer” becomes invalid when “Photo mode” of “Camera settings” is set to
“Sports”, “Night mode”, or “Pet” of “Scene” in Photo Mode.
Residual images might remain in the area where the subject is moving, or noise might
be found in overall area. In that case, set this function to “OFF”.
In Movie Mode, the shooting range varies depending on the “Auto” or “OFF” setting
because peripheral pixels are used for the processing by Image Stabilizer.
<Shoot with frame>
When “Image size” is set to “2M (1200 x 1600)” or larger, you cannot shoot with a
frame.
<Flicker correction>
If you set to “Auto”, it may take a while to automatically adjust the flicker. In this case,
switch to Mode 1 or Mode 2 according to the power frequency provided in the
shooting location.
<Storage setting>
See “Select storage” for how to set a storage location on the microSD card.
If you change “File size setting” to “Long time”, “Store in” is set to “microSD” and
“Storage setting” cannot be operated.
When “Auto save set” is set to “ON”, the image is saved to the latest folder if “Select
storage” is not set or the folder set as a destination folder is deleted.
<High sensitiv.>
When “ON” is set, you cannot set “Image size” to “2M Wide (1920 x 1080)” or larger.
When you set “High sensitiv.” to “ON” while “Image size” is set to “2M Wide (1920 x
1080)” or larger, “Image size” is changed to “2M (1200 x 1600)”. If you switch “High
sensitiv.” to “OFF” without changing “Image size” and without ending the camera, it
returns to the image size before you set “High sensitiv.” to “ON”.
<Shot number>
The number of shots that can be set differs depending on the image size. The number
of shots that can be set is as follows:
VGA (480 x 640): 4
QVGA (240 x 320): 5 through 10
QCIF (144 x 176): 5 through 20
Sub-QCIF (96 x 128): 5 through 20
<Display size>
When “Image size” is set to “HVGA Wide (640 x 352)” or larger, “Fit in display” always
applies.
When “Image size” is set to “QCIF (176 x 144)” or “Sub-QCIF (128 x 96)”, the image is
enlarged two times at both lengthwise and sidewise when it is displayed in “Actual
size”.
The setting for the Finder display is reflected in the Post View display; however the
setting for the Post View display is not reflected in the Finder display.
<Common replay mode>
You cannot operate when you set “File size setting” to “Long time”.
Information