93
So
un
d/
Scre
en/
Li
gh
t S
e
ttin
g
s
Information
You can set the Call Receiving display by selecting “Phone” or “Videophone”, and
then by selecting “Select calling disp.”. Go to step 2 on page 100.
You can set the Mail Receiving display by selecting “Mail”, “Chat mail”, “MessageR” or
“MessageF”, and then by selecting “Select receiving disp.”. Go to step 2 of “Set
Stand-by Display” on page 99.
The priority order of ring tones is as follows: “Read aloud settings”
→
“Setting for
Phonebook entry”
→
“Group setting”
→
“Select ring tone” (“Select ring tone” of “Multi
number” when a call comes in to the additional number, and “Ring tone set. for No. B”
of “2in1 setting” when a call comes in to Number B while using 2in1).
The ring tone or images set at purchase might be played back or displayed for
incoming calls or messages, depending on the combination of this function and
“Display setting”.
See “
i
motion info” to check whether the i-motion file can be set for a ring tone.
When you set an i-motion file containing video and sound for a mail ring tone, you can
press
-
r
or others to stop the ring tone.
When you set an i-motion file containing video and sound for a ring tone
(Chaku-motion), it is played back taking priority over “Display setting”. However, if you
set a voice-only i-motion file for the ring tone, the image set by “Display setting” is
displayed.
When you set an i-motion file containing video and sound for “Select calling disp.”, the
i-motion file is played back taking priority over this function for incoming calls.
However, if you set an i-motion file containing only video for “Select calling disp.”, the
ring tone selected for this function is played back for incoming calls.
You cannot set an i-motion file which contains video for “i-concier”.
When different types of mail — i-mode mail, SMS messages, chat mail, or Messages
R/F — are received at the same time, the priority order of ring tone as follows: “Chat
mail”
→
“i-mode mail/SMS”
→
“MessageR”
→
“MessageF”. If you receive the same
type of mail simultaneously, the ring tone corresponding to the mail you have received
last works.
For melodies downloaded, attached to mail, or prohibited from being attached to mail
or being output from the FOMA terminal, a playing part may be specified in advance.
When a play-part-specified melody is set for a ring tone, only the specified part is
played back.
You can set whether to add stereophonic sound effects to the playback
tone of i-motion files, melodies, ring tones, and effect tones.
1
m
Set./Service
Sound
Melody effect
Do the following operations.
3D Sound is a function that creates stereophonic sound and spatially-moving sound
through the use of the Stereo Earphone Set. 3D Sound compatible i-
α
ppli games, ring
tones, and i-motion files enable you to enjoy live-like feeling of sounds.
+
m
-
6
-
4
<Melody Effect>
Setting Sound Effects of Ring Tone or
Melody
Stereo&3DSound
You can play back 3-dimensional sound from the Stereo
Earphone Set (option). This is effective for the i-
α
ppli effect tones
or ring tones.
ON or OFF
Position to play
You can set the play start position of the melody that has been set
for the ring tone or alarm tone.
Select an item.
Play all
. . . . . . . . Plays back from the beginning of the melody.
Play portion
. . . Plays back from the start position set for the
melody.
3D Sound
Information
Stereognostic sense might differ depending on the person. If you feel strange, switch
“Stereo&3DSound” to “OFF”.