244
1S
e
g
The icon appears on the desktop.
“
” . . . . Displayed when an alarm is set for today (except the setting for past time).
“
” . . . . Displayed when an alarm is set for tomorrow or onward only.
If you set TV Timer with “Alarm” set to “OFF”, the icons are not displayed.
Function Menu while the TV Timer List or the Timer
Recording List is Displayed
New
Go to step 1 of “TV Timer List” on page 241 for TV Timer.
Go to step 1 on page 242 for Timer Recording.
Edit
Go to step 1 of “TV Timer List” on page 241 for TV Timer.
Go to step 1 on page 242 for Timer Recording.
Sort
You can change the display order.
Select an order.
Delete this
YES
Delete past
You can delete the setting of TV Timer/Timer Recording whose
start date/time or end date/time is set for the past date/time.
YES
Delete selected
Put a check mark for the setting of TV Timer/Timer
Recording to be deleted
l
(
)
YES
Delete all
Enter your Terminal Security Code
YES
Memory info
[Timer Recording list
only]
You can display the used memory space (estimate).
When you set an alarm for “TV Timer” or “Timer recording”
<TV Timer>
If you set “Act. TV w/ alarm” to other than “Auto ON”, the alarm sounds for about five
minutes, and illumination lights. The vibrator works as the same setting for “Phone” of
“Vibrator”. The set start date/time, channel, program name and an animation appear on
the display.
If you set “Alarm” to “ON” and “Act. TV w/ alarm” to “Auto ON”, 1Seg automatically starts
when the specified time comes. The alarm does not sound.
To end watching, press
h
and select “End 1Seg”.
If you set “Off timer”, the confirmation display appears asking whether to continue
watching when the specified time elapses. If you select “NO” or do nothing for about 15
seconds, 1Seg automatically terminates.
<Timer Recording>
About one minute before starting time, the alarm sounds for about two seconds, and
illumination lights. The vibrator works as the same setting for “Phone” of “Vibrator”. The
set start date/time, end date/time, channel, program name and an animation appear on
the display, then the viewer display appears. If you do nothing for about one minute after
the recording starts, the Stand-by display appears. You can show the viewer display by
pressing
x
and selecting “Activate 1Seg”.
To end recording started by Timer Recording to save video, press
O
o
(
) from the
viewer display and select “YES”.
During a call
The alarm sounds from the earpiece.
During operations
<TV Timer>
When “Alarm setting” is set to “Operation preferred”, the timer alarm sounds only when
the Stand-by display is shown. When it is set to “Alarm preferred”, the timer alarm
sounds even while you are operating another function or during a call. (See page 385)
<Timer Recording>
Timer Recording works according to the setting of “Priority”. (See page 243) However,
Timer Recording might not work when you are reading to/writing from the microSD
card, or accessing the Data Storage Center.
When the timer alarm is set to the same time of “Alarm”, “ToDo”, or “Schedule”
The alarm sounds in the priority order of “Alarm”
→
“Timer recording”
→
“ToDo”
→
“Schedule”
→
“TV timer”.
When the time specified for “TV Timer” or “Timer recording”
comes
