231
1Seg
Activate 1Seg. (See page 233)
■
Battery level
If you try to start 1Seg or 1Seg starts automatically by TV Timer when the battery is low,
the battery alert tone sounds, and the confirmation display appears asking whether to
start it. Also, when the battery becomes low while you are watching or recording a 1Seg
program, the battery alert tone sounds, and the confirmation display appears asking
whether to end 1Seg. The battery alert tone sounds regardless of the setting of “Keypad
sound”.
When you do nothing from the confirmation display for about one minute, 1Seg
automatically terminates.
While “Rec. when low battery” is set to “ON”, the confirmation display does not appear
during recording. (See page 247)
If the battery level becomes low during recording and recording ends, the video
recorded up to that point is automatically saved.
During Multitask, the battery alert tone sounds but the confirmation display does not
appear. Switch to the viewer display and then operate.
■
When a call etc. comes in while you are watching or recording a 1Seg program
When an event shown below occurs while watching or recording a 1Seg program, the
video and audio are suspended, and each function works. Recording is not suspended.
After you finish each function, you can resume watching a 1Seg program. See page 237
for receiving i-mode mail messages, SMS messages or Messages R/F.
Incoming voice call or videophone call
(To start recording when a call is received, refer to “Rec. program when call”.)
Notification of Alarm, Schedule, ToDo, or TV Timer
(when “Alarm setting” is set to “Alarm preferred”)
Notification of Timer Recording
(When the start date/time comes, the FOMA terminal works according to the setting of
“Priority”.)
Activating 1Seg
2
Information
1Seg is not available while “USB mode setting” is set to “microSD mode” or “MTP
mode” and the FOMA terminal is connected to a personal computer.
1Seg might automatically start when you end a call by closing the FOMA terminal
during a call. In such a case, be careful not to use the FOMA terminal close to your
ear because audio is output at the sound volume for 1Seg.
The life of battery pack may shorten if you watch 1Seg programs for a long time
during charging.
1Seg is not available overseas.
To watch 1Seg programs, you need to execute Channel Setting and to
select a channel list in advance. You can store up to 10 channel lists.
The broadcasting stations you can receive differ depending on the local area. If you
store a channel list of the area for traveling or business trip, you can watch programs in
the area just by selecting the channel list.
The remote-control numbers you use with channel selections are previously set for
respective broadcasting stations.
You cannot execute Channel Setting during recording of a 1Seg program.
The broadcasting stations you can currently watch are automatically
searched and stored in a channel list.
You need to set this function in the terrestrial digital TV broadcasting service area.
1
m
1Seg
Channel setting
Auto channel setting
YES
Searching takes place.
From the Channel list display, press
i
(
), select “Channel setting”
→
“Auto channel set.”.
From the viewer display, press
i
(
), select “Disp.Ch. /operation”
→
“Channel setting”
→
“Auto channel set.”.
■
Important
Note that we cannot be held responsible for loss or changes of the saved contents due
to a malfunction, repair, or other mishandling of the FOMA terminal. Furthermore, we
cannot move the saved information (such as still images, TV links, or information
saved to the broadcasting storage area) when you change your FOMA terminal or
have it repaired.
<Channel Setting>
Setting Channels
Auto Channel Setting
