Docomo Ascend HW-03E, Инструкция по эксплуатации

Страница: 99 / 189

97
Settings
Information
･
For manually scanning available devices, tap "Scan" on the Wi-Fi Direct
setting screen.
Access points (sp-mode, mopera U) to connect to the Internet are
registered by default, adding and editing access points are available.
By default, sp-mode is set as default access point.
1
From the Home screen,
M
→
"Settings"
→
"More..."
→ "Mobile networks" → "Access Point Names"
1
From the Home screen,
M
→
"Settings"
→
"More..."
→ "Mobile networks" → "Access Point Names"
2
M
→
"New APN"
3
Edit setting for access point
→
M
→
"Save"
Information
･
Do not change the MCC/MNC to other than 440/10. The settings disappears
from the screen. In this case, initialize the access point or set a new access
point.
By initializing an access point, the default state is restored.
1
From the Home screen,
M
→
"Settings"
→
"More..."
→ "Mobile networks" → "Access Point Names"
2
M
→
"Reset to default"
sp-mode is ISP for NTT DOCOMO smartphone. In addition to accessing
Internet, you can use the mail service using the same address as i-mode
mail (@docomo.ne.jp), etc. sp-mode is a service requiring subscription.
For details on sp-mode, refer to NTT DOCOMO website.
mopera U is ISP of NTT DOCOMO. If you have subscribed to mopera U,
you can use Internet after making the simple settings. mopera U is a
service requiring subscription.
1
From the Home screen,
M
→
"Settings"
→
"More..."
→ "Mobile networks" → "Access Point Names"
2
Tap of "mopera U"/"mopera
U設定
(mopera U
setting)" to turn to
Setting access point
Checking currently used access point
Adding access point
Initializing access point
sp-mode
mopera U
Setting mopera U