119
File management
<Connecting to a TV using the Desktop Holder HW02 (optional) and AC
adapter 03 (optional)>
1
Insert microUSB plug of microUSB cable to the
external connection jack of the desktop holder facing
USB mark up
・
Insert horizontally and slowly not to give excessive force to the plug of
microUSB cable.
2
Inset USB plug of microUSB cable to USB connector
of AC adapter horizontally, then inset the power plug
of the AC adapter main unit
3
Insert connector (type A) of HDMI cable to HDMI jack
of the desktop holder paying attention to the
orientation (
a
), then connect the opposite connector
to a TV
4
Install the terminal aligning the positions of the
external connection jack and the charging jack of the
desktop holder (
b
)
・
The terminal is connected to a TV. For connecting/settings for
removing or image display/operations, refer to the manual of TV. When
connection is complete, view photos/play videos on the terminal.
5
When the operation is finished, remove the connector
of HDMI cable from the TV
・
When HDMI cable is removed, TV may keep being HDMI input mode.
In that case, switch to input mode of terrestrial digital TV broadcasting
etc.
Information
・
When watching Mobacas/1Seg, receiving status may be affected. Receiving
status may be better in the following methods.
- Fully extend the antenna.
- Keep the terminal away from TV as far as possible.
- Keep HMDI cable connecting to TV away from the antenna as far as
possible.
- Change the orientation of the terminal or antenna.
a
b
AC adapter 03 main unit
microUSB cable
HDMI cable
(commercially available)
Connector
(type A plug)
Connecting to a TV
Содержание Ascend HW-03E
Страница 1: ...INSTRUCTION MANUAL 13 03 HW 03E ...