179
Appendix/Index
2
Rewriting starts automatically approximately
10 seconds after "Start update" appears
・
Rewriting starts when you tap "OK".
・
While updating the software, all key operations become disabled. And
updating cannot be canceled.
・
When the software update is complete, the terminal restarts
automatically and the Home screen appears.
Information
・
If software update is not needed, "No update is needed" is displayed.
When software update is complete, a completion notification appears on
the status bar. Open the notification panel and tap the notification to
display the update completion screen.
You can preset time to update the software if you want to specify another
time for installing the update file.
1
Display update notice screen
→
"Set Time"
2
Enter time
→
"Set"
A rewriting screen appears at the update start time. Approximately 10
seconds after that, rewriting starts automatically.
Information
・
While updating the software, all key operations become disabled. And
updating cannot be canceled.
・
If software update could not be started at the preset time, the software
update will be performed at the same time the following day.
・
Software is not updated at the reserved time during OS version up.
・
When an alarm, etc. is set at the same time as the reserved time, priority will
be given to the software update.
・
If HW-03E is turned OFF at the reserved time, the software update starts at
the same time as the reserved time after the terminal is turned ON.
Post-update display
Reserved software update
When the reserved time is reached
Содержание Ascend HW-03E
Страница 1: ...INSTRUCTION MANUAL 13 03 HW 03E ...