Directed Electronics Python 3000 ESP страница 24 Скачать руководство пользователя

Страница: 24 / 40

system features learn routine

The System Features Learn Routine dictates how the unit operates. Due to the number of features, they have been

divided into three menus. It is possible to access and change any of the feature settings using the Valet/program

switch, however, this process can be greatly simplified by using the optional DEI Bitwriter (

P/N 998T

) or Personal

Computer Interface,

P/N 996T

. Any of the settings can be changed and then assigned to a particular transmit-

ter, up to four, a feature called Owner Recognition. Each time that particular transmitter is used to disarm the

system, the assigned feature settings will be recalled. Owner Recognition is only possible when programming the

unit with the

996T

or the

998T

DEI Bitwriter.

Using the optional DEI Bitwriter or PC Interface, the learn routine may be locked. Make sure the learn routine is

unlocked before programming features. If the siren generates one long chirp when attempting to program the

unit, the learn routine is locked and must be unlocked using the DEI Bitwriter or PC before proceeding.

TO ENTER THE SYSTEM FEATURES LEARN ROUTINE

Open a door.

(The H1/5 GREEN wire or the H1/7 VIOLET wire must already be connected.)

Turn the ignition on and then back off.

(The YELLOW wire, H1/9 must already be connected.)

Select a Menu.

Press and

HOLD

the Valet/program switch. (The Valet/program switch must

be plugged into the blue port.) After 3 seconds, the siren will chirp once indicating entry

into Feature Menu 1. If this is the menu you want to access, release the button and advance

to Step 4. If the button is not released, you will jump to the next Feature Menu and the

siren will chirp twice. There are three possible feature menus. Once you have selected the

desired feature menu, release the Valet/program switch.

Select a Feature.

Press and release the Valet/program switch the number of times corre-

sponding to the feature you wish to change. For example, to access the third feature, press

and release the Valet/program switch three times. Then press it once more and

HOLD

it.

The siren will chirp the number of times corresponding to the feature you have accessed.

Program the Feature.

While

HOLDING

the Valet/program switch, you can toggle the

feature on and off using the remote transmitter. Pressing Button I will select the one chirp

or default setting. Pressing Button II will select the two chirp setting.

Содержание Python 3000 ESP









































Результаты поиска

Содержание Python 3000 ESP

Отзывы:

Похожие инструкции для Python 3000 ESP

Бренды по названию

Популярные бренды

Directed Electronics Python 3000 ESP, Руководство по установке

Результаты поиска

Содержание Python 3000 ESP

Отзывы:

Похожие инструкции для Python 3000 ESP

Бренды по названию

Популярные бренды