© 2001 Directed Electronics, Inc. Vista, CA
35
multi-level security arming
Multi-Level Security Arming is a feature that allows the user to select which of the system's inputs or sensors will
be active and which will be bypassed when the system is armed. (See
Table of Zones
section of this guide.) Multi-
Level Security Arming can only be accessed from an Expanded Configuration transmitter. Pressing Button I of the
Expanded Configuration transmitter again within five seconds of arming the system will activate the Multi-Level
Security feature. Each time Button I is pressed again, a different security level is selected. The different levels
of security are selected as follows:
■
Pressing Button I one time: The siren chirps once. The system is armed.
■
Pressing Button I a second time within five seconds: The siren chirps twice followed by a long chirp. Zones
Two and Five are now bypassed.
■
Pressing Button I a third time within five seconds: The siren chirps three times followed by a long chirp.
Zones Four and Six are now bypassed.
■
Pressing Button I a fourth time within five seconds: The siren chirps four times followed by a long chirp.
Zones Two, Four, Five and Six are now bypassed.
■
Pressing Button I a fifth time within five seconds: The siren chirps five times followed by a long chirp. All
input zones are now bypassed with the exception of Zones Seven and Eight.
transmitter code linking
Channels Four, Five and Six can be linked to the disarm function of a transmitter. Once a channel is linked to
disarm, each time that transmitter is used to disarm, the system will supply a (-) 200 mA pulse on the linked
output wire. To link a channel to disarm:
1.
Open a door.
(The H1/5 GREEN wire or the H1/7 VIOLET wire must already be connected.)
2.
Turn on the ignition.
(The H1/9 YELLOW wire must already be connected.)
3.
Select Channel 4, 5 or 6.
Press and release the Valet/program switch the number of times
corresponding to the channel you wish to link. Then press and
HOLD
the Valet/program
switch. The siren will chirp to confirm the channel you have accessed.
