© 2001 Directed Electronics, Inc. Vista, CA
27
feature descriptions
The features of the system are described below. Features that have additional settings that can be selected only
when programming with the PC interface or Bitwriter are indicated by the following icon:
1-1 ACTIVE/PASSIVE ARMING:
When active arming is selected, the system will only arm when the transmitter is
used. When set to passive, the system will arm automatically 30 seconds after the last door is closed. To alert
the consumer of passive arming, the siren will chirp 20 seconds after the door is closed. This provides the con-
sumer with an audible warning prior to the system actually arming. At the 30 second mark, the system will arm,
but the siren will not chirp.
1-2 AUDIBLE ARM/DISARM CONFIRMATION ON/OFF:
This feature controls the chirps or voice messages (if using
the 516M) that confirm the arming and disarming of the system.
feature menu 1: basic features
FEATURE
DEFAULT ONE-CHIRP SETTINGS
TWO-CHIRP SETTINGS
NUMBER
(PRESS TRANSMITTER BUTTON I)
(PRESS TRANSMITTER BUTTON II)
3-1
Channel 3 validity
Channel 3: latched/latched, reset with
ignition/timed 30/60/90
3-2
Channel 4 validity
Channel 4: latched/latched, reset with
ignition/timed 30/60/90
3-3
Channel 5 validity
Channel 5: latched/latched, reset with
ignition/timed 30/60/90
3-4
Channel 6 validity
Channel 6: latched/latched, reset with
ignition/timed (see Feature 3-5)
3-5
Channel 6 15-second timed
Channel 6: 5/10/20/25/30-second timed
*
3-6
Channel 7 second unlock
Channel 7: standard channel
3-7
Double pulse unlock off
Double pulse unlock on
3-8
Horn output flashing
Horn output constant
3-9
Disarm with Channel 2 ON
Disarm with Channel 2 OFF
3-10
Ground When Armed (GWA) in Valet mode ON
GWA in Valet mode OFF
Feature Menu 3: Auxiliary Channel Outputs
