© 2001 Directed Electronics, Inc. Vista, CA
25
NOTE:
The Ghost Switch input (Feature 2-5) and the Channel Six timed output (Feature 3-5) have
five possible settings each. Pressing Channel Two will toggle through all the possible settings.
6.
Release the Valet®/program switch.
Once the feature is programmed:
■
Other features can be programmed within the same menu.
■
Another menu can be selected.
■
The learn routine can be exited if programming is complete.
TO ACCESS ANOTHER FEATURE IN THE SAME MENU
Press and release the Valet/program switch the number of times necessary to advance from the feature you just
programmed to the next one you want to program. Then press the Valet/program switch once more and
HOLD
it.
For example, if you just programmed the third feature in the menu and you would like to program the seventh
feature in the menu, you would press and release the Valet/program switch four times. Then press it once more
and
HOLD
it. The siren would chirp seven times to confirm access to the seventh feature.
TO SELECT ANOTHER MENU
Press and
HOLD
the Valet/program switch. After three seconds, the unit will advance to the next menu and the
siren will chirp, indicating which menu has been accessed. For instance, if you just programmed some features
in Feature Menu 1 (Basic Features Menu) and you would like to program a feature in Feature Menu 3 (Auxiliary
Channel Outputs Menu), press and
HOLD
the Valet/program switch. After three seconds, the siren chirps twice
indicating access to the second menu. Continue to hold the Valet/program switch and three seconds later the siren
would chirp three times. Features in Feature Menu 3 could then be programmed by following Steps 4 through 6
of the Systems Features Learn Routine.
TO EXIT THE LEARN ROUTINE
Do one of the following:
■
Close the open door.
■
Turn the ignition on.
■
No activity for longer than 15 seconds.
■
Press the Valet/program switch too many times.
