© 2001 Directed Electronics, Inc. Vista, CA
37
long-term event history
The system stores the last two full triggers in memory. These are not erasable. Each time the unit detects a full
trigger, the older of the two triggers in memory will be replaced by the new trigger. To access long-term event history:
1.
Press and
HOLD
the Valet/program switch.
2.
Turn on the ignition while continuing to
HOLD
the Valet/program switch.
3.
Release the Valet/program switch.
4.
Press and release the Valet/program switch within 5 seconds.
The LED will flash in groups for one minute, or until the ignition is turned off, to indicate the last two zones
that triggered the unit.
NOTE:
The Warn Away triggers are not stored to memory.
optional vehicle recovery system installation
No additional parts are required to add the optional Vehicle Recovery System (VRS) feature. However, for the VRS
feature to be effective, the 8618 starter kill relay must be installed. The VRS feature can be activated with the
remote transmitter and deactivated with the Valet/program switch. (See the
System Features Learn Routine
section of this guide.)
To arm the VRS:
1.
Turn the ignition to the ON position.
