Direct Healthcare Group QUATTRO Acute, Руководство по обслуживанию, Страница: 56 / 60

Q U AT T R O
®
A C U T E & Q U AT T R O
®
P L U S
D H G - H E A LT H C A R E . C O M 5 5
Guidance and Manufacturer’s Declaration: Electromagnetic Immunity (IEC 60601-1-2)
Immunity Test
IEC 60601 Test
Level
Compliance Level
Electromagnetic
Environment - Guidance
Conducted RF
IEC 61000-4-6
Radiated RF
IEC 61000-4-3
3 V rms
150 kHz ~ 80 MHz
6 V rms
150 kHz to 80 MHz
in ISM and amateur
radio bands between
0,15 MHz and 80
MHz
10 V/m
80 MHz ~ 2.7 GHz
3 V rms
6 V rms
10 V/m
Field strengths from fixed RF
transmitters as determined by
an electromagnetic site
survey,
a
should be less than
the compliance level in each
frequency range.
b
Interference may occur in the
vicinity of equipment marked
with the following symbol:
Note 1: At 80 MHz and 800 MHz, the higher frequency range applies.
Note 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and
reflection from structures, objects, and people.
a
Field strengths from fixed transmitters, such as base stations for radio (cellular/ cordless) telephones and land mobile
radio, AM and FM radio broadcast, and TV broadcast cannot be predicted theoretically with accuracy. To assess the
electromagnetic environment due to fixed RF transmitters, an electromagnetic site survey should be considered. If
the measured field strength in the location in which the QUATTRO is used exceeds the applicable RF compliance level
above, the QUATTRO should be observed to verify normal operation. If abnormal performance is observed, additional
measures may be necessary, such as reorienting or relocating the QUATTRO.
b
Over the frequency range 150 kHz to 80MHz, field strengths should be less than 3 V/m.
Declaration – Electromagnetic Immunity
Every care has been taken to ensure that the information contained in this manual was correct at the time of going to
press. However, Direct Healthcare Group reserves the right to modify the specification of any product without prior notice
in line with a policy of continual product development. Information is available in alternative formats on request.
Our standard terms and conditions apply.