Digital Projection POWER 2v, Руководство пользователя

Страница: 49 / 174

The Image Parameter controls on the remote can be used in the Menu system
providing that no data fields are being edited.
The adjusted parameter settings for an input device can be saved to a 'channel'. A
channel setting also stores the input source address (see storing system
configurations, B—22, for more information). This allows you to use the input
device at a later date without having to reconfigure the parameters to achieve the
desired image. The channel is selected in the Channel Set-up menu or by using the
remote. The source image is then displayed on screen.
LENS CONTROL
Projectors fitted with a motorised lens mount have additional picture control
features available via the remote control in the form of Focus and Lens Shift. Both
features are operated via the LENS button (see System Operation, C—4) and allow
the user to either adjust the image Focus and/or adjust the horizontal and vertical
positioning of the displayed image relative to the projector.
ON SCREEN DISPLAY (OSD)
The On Screen Display (OSD) displays the system menus and messages. The OSD
will come on automatically at power-up if it is preset in User Preferences Menu.
Alternatively it can be activated by the OSD ON remote control button.
MENU SYSTEM
The main menu provides access to dialogue boxes which allow you to control the
projector and to view system settings. If the OSD is set or switched to 'OFF' the
menu system and messages will not be displayed on screen.
BÑ21
System Installation
INSTALLATION
LBV00018; Revision E - 28/01/98
✍