Digital Projection POWER 2v, Руководство пользователя

Страница: 76 / 174

'COMPMODE' (Channel Computer Mode)
COMPMODE enables you to modify individual computer modes. If the current
channel is a video configuration, you will not be able to access this function.
The Channel Computer Mode screen is split into two main areas. The top of the
screen displays the channel number, channel name and the computer card. The
remainder of the screen provides a list of available modes. The list provides
horizontal and vertical scan rates, sync pulse polarity and a name to help you select
the required mode. To exit this screen you must use the 'Exit' button on the remote.
Select a mode using the cursor keys and press 'ENTER'. This will change the
display to the Mode Parameters window and allow you to make modifications. If
you select a mode other than the one currently being used to display the image, the
display will turn light blue. The Mode Parameters window will then be displayed.
Modifications in the Mode Parameters window can have a serious effect upon
whether or not the mode can be used. Therefore a message box will appear upon
entry stating - "CAUTION Changes in this dialogue may prevent the Mode from
being selected by a Computer signal".
CÑ24
System Operation
OPERATION
LBV00018; Revision E - 28/01/98
S E L E C T V I E W C O P Y N E W M O D I F Y D E L E T E
O K
S w i t c h e r
I n p u t - - -
O N
C o l o u r T e m p 6 5 0 0
A s p e c t R a t i o M O D E
N a m e - - - - - - - - - - - - - -
C H A N N E L C O M P U T E R M O D E
C h a n n e l 0 3
N a m e - - - - - - - - - - - - - -
C o m p u t e r V I D E O 7
M o d e
H o r V e r P o l N a m e
K h z H z H V
3 1 . 5 0 6 0 . 0 0 N N 6 4 0 x 4 8 0
3 5 . 0 0 6 6 . 3 0 X X 6 4 0 x 4 0 0
4 8 . 0 0 7 2 . 2 0 P P 8 0 0 x 6 0 0
3 7 . 8 0 6 0 . 0 0 P P 8 0 0 x 6 0 0
5 7 . 9 0 9 0 . 0 0 P N 8 0 0 x 6 0 0
5 6 . 5 0 7 0 . 0 0 N N 1 0 2 4 x 7 6 8
4 8 . 7 8 6 0 . 0 0 X X 1 0 2 4 x 7 6 8