Digital Projection POWER 2v, Руководство пользователя

Страница: 90 / 174

The duplication of a computer name allows you to save a different set of mode
parameters for the same computer. If a card using the factory defaults is selected, a
duplicate will be made using the same name but with an asterix (
*
) at the end.
The next step is to set the new computer's Resolution Mode, this is done by
selecting 'CREATE/MODIFY'. The 'MODE PARAMETERS' window will open
(see below) and you should enter the following information.
Mode Name - Name the set of mode parameters.
Scan Rates - Enter the scan rates stated in your computer card specifications.
Sync Polarity - Defines the polar values for the horizontal and vertical syncs as
stated in your computer card specifications.
Size and Position - Set values (shown as percentages) for the horizontal and
vertical size and position.
Active pixels - In these fields define the number of active pixels across the display
and the phase of each pixel from the start of one pixel period to the end.
Aspect Ratio - From this fly-out list select an aspect ratio.
CÑ38
System Operation
OPERATION
LBV00018; Revision E - 28/01/98
C A N C E L O K
N e g
N e g P o s
P o s N / A
N / A
R e s P h a s e
A c t i v e P i x e l s
A s p e c t R a t i o
C o m p u t e r D I A M O N D
S y n c P o l a r i t y
M o d e N a m e
H o r
V e r
k H z
H z
- - . - -
- - . - -
4 x 3
1 2 0 0 1 0 0
1 0 2 4 x 7 6 8
M O D E P A R A M E T E R S
S c a n
1 0 0 %
1 0 0 % 1 0 0 %
1 0 0 %
P o s S i z e