Digital Projection POWER 2v, Руководство пользователя

Страница: 169 / 174

The On Screen Display (OSD)
A menu system is provided to access the projector's system and image input
settings. In order to access the menu system OSD must be turned 'ON'. If OSD is
ON but no menus are displayed press the MENU button on the remote control. The
MENU button temporarily removes or replaces the menu display allowing you to
exit the menu system and re-enter at the same point. To leave the menu system
completely, either press EXIT at the main menu or OSD OFF at any time. When the
menu system is re-entered, you will be at the Main Menu. Movement through the
menu system is controlled by the cursor and enter buttons on the remote control.
The Menu System
The MAIN MENU provides access to the sub-menus which allow you to control
the projector and to view any system settings. A brief description of each sub-menu
is given below.
CHANNEL SET UP - allows you to create NEW channel configurations, SELECT
a channel and VIEW, COPY, MODIFY or DELETE that channel.
NEW
The NEW command allows you to set up a channel for a new input device.
Highlight a channel and select NEW, a new channel with the default parameters as
specified in the USER PREFERENCES menu will be automatically created. These
parameters can then be modified to meet your requirements.
SELECT
Channel selection can be made in two ways, by simply keying in the channel
number on the remote control or by selection in the Channel Set Up screen. To
select a channel using the On Screen Display, highlight both the desired channel
and SELECT using the cursors then press ENTER.
iii
Appendix
Menu System Review
APPENDIX
LBV00018; Revision E - 28/01/98