Digital Projection POWER 2v, Руководство пользователя

Страница: 50 / 174

Storing System Configurations
A Channel is a 'store' containing all of the parameters associated with an input and
the image it displays. The projector has 63 available channels.
In addition to the channels there are three further 'stores'. They are the Previous
Store, Revised Store and Factory Pre-set. These three stores are accessed directly
from the remote using the PREV (previous store), REV (revised store) and >.<
(factory pre-set) buttons.
When a channel has just been selected or the factory pre-set is being used, the
parameters are held in the previous store. If any changes are then made to the
channel or the pre-set, they are held in the revised store.
At any point PREV and REV can be pressed to compare the original image with the
revised image. Any final changes can be saved by pressing SAVE on the remote
which will transfer the contents of the Revised store to the last channel selected.
To clear changes held in the Revised store re-select the original channel using the
numeric keypad on the remote control.
The factory pre-set contains configuration parameters which cannot be altered,
however changes can be made and stored in a new channel using the Channel
Set-up menu. There is a pre-set for a computer input and one for a video input. The
pre-set will produce an image but not necessarily of the ultimate quality. The
quality can be improved using the Modify Command. The factory pre-set channel
number is 0 (zero).
To find out which channel is currently being used, press MENU and select
Channel Set-up. The current channel will be highlighted in the channel list.
BÑ22
System Installation
INSTALLATION
LBV00018; Revision E - 28/01/98
✍
✍