Digital Projection POWER 2v, Руководство пользователя

Страница: 170 / 174

VIEW
The VIEW command will display information about the selected channel, the
information cannot be modified in this function. To select a channel, highlight it
using the cursors and select VIEW.
COPY
The COPY command allows all or just selected parameters from a channel to be
copied to another channel. To copy a channel highlight both the desired channel and
COPY using the cursors then press ENTER. Next, enter the destination channel and
the parameters to be copied.
MODIFY
The MODIFY option allows you to change individual channel configurations. As
the Size & Position and Computer Mode parameters are defaults when you create a
new channel you can re-define them using this option.
DELETE
The DELETE command allows to to delete any unwanted channels (except the
factory defaults). To delete a channel highlight it in the Channel Set Up screen and
select DELETE. For safety, you will be asked to confirm the deletion.
ADD COMPUTER - allows you to configure the projector to display different
computer card outputs. It also allows groups of computer modes to be created and
saved under a collective name. Other options include the modification, deletion and
copying of computer cards.
DELETE
It is possible to delete a single mode contained within a computer card or all modes
contained within a card (effectively deleting the complete card). Select the card
from the fly-out list in the Add Computer Screen, only computer cards you have
created are valid for deletion - factory supplied cards cannot be deleted. Assuming
you have selected a valid computer card, selecting DELETE will open the 'Delete
Computer' window allowing you to select the appropriate modes.
iv
Appendix
APPENDIX
LBV00018; Revision E - 28/01/98