Digital Projection POWER 2v, Руководство пользователя

Страница: 85 / 174

The Projector Status function is accessed through the Main menu. Information
about the lamp, the projector temperature and the user memory can be viewed. The
last four warning messages are also stored in here.
Lamp Run - The number of hours the current lamp has run is displayed.
Lamp Strikes - The number of times the current lamp has struck is displayed.
Lamp Status - If “OK” is displayed, the lamp is operating as normal. If
“REPLACE” is displayed, the lamp is coming to the end of its useful life.
Temperature - Displays the temperature condition of the projector according to a
temperature sensor within the case. “OK” is the normal operating temperature.
“HOT” is when the lower temperature sensor has triggered. “HOT” warns you to
investigate the reasons for the high temperature. If the higher temperature sensor is
triggered, the projector will shut down.
User Memory Available - This displays the percentage of user memory available
for storing additional or updated Factory Supplied Computer Cards and Modes.
CÑ33
System Operation
Projector Status
OPERATION
LBV00018; Revision E - 28/01/98
P R O J E C T O R S T A T U S
S o f t w a r e V e r s i o n 2 . 2 8
U n i t R u n - T h i s U n i t 5 0 0 H o u r s
U n i t S t r i k e s - T h i s U n i t 1 5 0 T o t a l
L a m p S t a t u s O K
T e m p e r a t u r e O K
U s e r M e m o r y A v a i l a b l e 1 0 0 %
W A R N I N G M E S S A G E S
L A S T
M e s s a g e 1
M e s s a g e 2
M e s s a g e 3
M e s s a g e 4