Dialoc ID MCQ-PRO, Руководство пользователя

Страница: 59 / 89

MCQ-PRO RFID Reader
— Installation and Tuning Manual Version 1.00
Page 59 of 89
9.2.3 Memory tab
Figure 49: C220 panel (Parameters tab)
Write Operation
To write memory and status bytes of all C220 tags in radio field, enter lockable and non-
lockable data (in hexadecimal) to write, choose status bytes to set and click “Write All”.
The status bits available are:

Enable EAS: Specifies if EAS should be enabled or disabled (not lockable).

Fast rate: Specifies if the reply rate should be fast (~16 ms) or normal (~33 ms) during
asynchronous read process (lockable).

Short reply: Specifies if the reply size should be short (only lockable memory data is
sent) or long (both non-lockable and lockable memory data are sent) during
asynchronous read process (lockable).

Lock data and status bits: Specifies if lockable memory (lockable data and status bits)
should be locked. This operation is irreversible. Once lockable memory is locked,
EAS state can be changed in "EAS and State" tab.
Write operation does not perform verification.
CAUTION: Lockable data, Fast rate bit and Short reply bit cannot be modified
once the Lock bit is set using “Lock data and status bits” option.