MCQ-PRO RFID Reader
— Installation and Tuning Manual Version 1.00
Page 44 of 89
Figure 36: RF Channels Configuration panel (Multiplexer tab)
Patterns:
A pattern describes the channels that emit, their RF field phase shift, the channels that receive,
the power used, the tag type to read and a set of conditions that will cause switching to the
next pattern in the sequence.
A pattern must define time to be active and/or rounds (number of wake-up commands sent to
tags) it allows before the multiplexer switches to the next pattern (or the first if this pattern is
the last). If both switch conditions are defined, the first condition met will trigger the switch.
To add a new pattern:
1.
Click on “
Add” button in “Patterns” box.
2.
Select the tag type to read when the pattern is active.
3.
Select the power to emit when the pattern is active (in milliwatts)
4.
Select channels to emit and receive while respecting following constraints:
a.
A pattern can have a maximum of two emitters and one receiver.
b.
A Monostatic channel that is set as a receiver must also be an emitter.
5.
Define a switch condition such as:
Содержание MCQ-PRO
Страница 1: ...User Manual Version 1 00...
