Dialoc ID MCQ-PRO, Руководство пользователя

Страница: 83 / 89

MCQ-PRO RFID Reader
— Installation and Tuning Manual Version 1.00
Page 83 of 89
10 Using IO Sets
10.1 IO Sets Configuration
An IO Set is a group of inputs/outputs that you can use with your application.
10.1.1 ISO Set Status
Open “IO Sets Configuration” panel by clicking on the icon
in the toolbar or by choosing
“IO Sets Configuration” in the “Radio” menu.
Figure 69: IO Sets Configuration panel
You can watch on this panel IO Set temperature and inputs status.
You can as well control outputs state by clicking on their LEDs.
Inputs are green when active and gray when inactive.
Outputs are red when active and gray when inactive. The output blinks if an overload is
detected.
10.2 Input trigger and Output feedback
You can start default read using an input trigger and get feedback when a tag is read with the
output feedback.
See section 8.2.4 to know how to enable those read mode options.