Dialoc ID MCQ-PRO, Руководство пользователя

Страница: 29 / 89

MCQ-PRO RFID Reader
— Installation and Tuning Manual Version 1.00
Page 29 of 89
To disconnect from a device, perform the same steps but click on the icon or right-click
the device and select “Disconnect from Device”.
To reboot a device, perform the same steps but click on the icon or right-click the device
and select “Reboot Device”.
5.1.4 Getting Device Information
You can point out a device icon ( ) to get its information.
Figure 18: Device Information
Product Name: DIALOC ID RFID device product name.
Description and Location: give custom information set for this device. They can be set in
“System Configuration” panel; see section 6.1 for more information.
Hardware and Firmware: give hardware and firmware version.
Serial Interface or Ethernet Interface: These sections give connection information
currently used to connect to the device.
If you swap a device plugged into your computer’s serial or USB ports with
another device, information about the device will be refreshed only when
connecting to it.
Getting Radio Information
You can point out a radio icon to get its information.